Unplug from the power, wait 10 seconds, and then reconnect.

USB ports are not functioning on the dock

Right-click USB Audio device and select Set as default.

Right-click and check both Show Disconnected Devices and Show Disabled Devices.Right-click the Sound icon on the System Tray.The video on the attached monitor is not displaying in extended mode Check the video resolution under Control Panel > Display > Change Display Setting.The video on the attached monitor is distorted or corrupted Unplug the power, wait 10 seconds, and then reconnect.NOTE: Video is not available outside the operating system or in a pre-boot environment such as the BIOS. To learn more about setting up and troubleshooting issues with multiple monitor setup, refer to these Dell knowledge-base articles How to Setup Multiple Monitors or How to Troubleshoot Multiple Monitor Issuesĭell D6000 docking station display resolution support using USB-C connectionĭocking station connected to PC using USB Type-Cĭell D6000 docking station display resolution support using USB 3.0 Type-A connectionĭocking station connected to PC using USB 3.0 Type-A Refer to the Display Resolution Table below for more details about the supported resolution when connecting multiple monitors to the docking station. Dell Universal Dock D6000 supports up to 3 displays when connected to your PC using the Thunderbolt 3 USB Type-C cable and up to 2 displays using the USB 3.0 cable. Therefore, for optimum graphics performance, it is recommended that Dell graphics drivers applicable for your PC be installed from Dell Drivers & Downloads website under the 'Video' section.Ĭonnect the monitor to the docking station using the HDMI / DisplayPort cable provided with the monitor. Microsoft Windows operating system includes the VGA graphics drivers only.

Dell d6000 drivers